Flying Squirrel148 V-Tail Or A-Tail Micro-Quad 3D Printer Model
The file 'Flying Squirrel148 V-Tail Or A-Tail Micro-Quad 3D Printer Model' is (stl) file type, size is 9.2MB.
The file 'Flying Squirrel148 V-Tail Or A-Tail Micro-Quad 3D Printer Model' is (stl) file type, size is 9.2MB.
Flying Squirrel148
I have teamed up with IF Productions! If you want a high quality carbon fiber and nylon print of the final design (not available here or anywhere else) then check out https://www.classifiedfpv.com/ or message me on here and we can place a special order.
V-Tail 3" race/freestyle kwad (A-Tail option included) (Old Design Only)
Top plate slides into the v-tail
SMA VTX mount post fits the back hole in the top plate
Fits motors up to 19MM in diameter so most 14XX
Revisions in final design not included in these models:
Base plate: countersunk holes enlarged; improved camera clearance; motor wire holes increased for better fitment; arms fully enclosed to provide more structural stiffness, if your motors are getting hot when you fly the other design, then you'll need this component instead
V-tail: print orientation changed for maximum strength; motor wire holes increased for better fitment; arms fully enclosed to provide more structural stiffness, if your motors are getting hot when you fly the other design, then you'll need this component instead
Skirt: Corrected prop clearance; variable camera mount configuration
Supports on V-Tail and A-Tail are required, use from the build surface only. Remove any auto-generated supports in the arms themselves
Any and all feedback would be awesome. Please post your makes and let me know if you fly it and how it does!
Here is the maiden flight: https://www.youtube.com/watch?v=FFl4_4Dl2vk
Here is the build video in 360 (look around): https://www.youtube.com/watch?v=wxRY1o8Ucio
Recommended parts (affiliate links)
FC and VTX combo (I used this): https://www.banggood.com/custlink/vmmDcZqhSd
ESC (i used): https://www.banggood.com/custlink/KvmGJ8zdis
ESC (Cheaper): https://www.banggood.com/custlink/KvKDr9zd9k
Diatone Stack: https://www.banggood.com/custlink/GDGDJ92dFW
HGLRC Stack: https://www.banggood.com/custlink/GvGKWSqYJd
HGLRC VTX: https://www.banggood.com/custlink/GDvDC9kdI5
KingKong Stack (w/ VTX): https://www.banggood.com/custlink/3KvDpizEcc
Skystar Stack (w/ VTX): https://www.banggood.com/custlink/D3mKW8Udr4
HGLRC Motor: https://www.banggood.com/custlink/GvvKJZqRWq
iFLight Motor: https://www.banggood.com/custlink/3K33cZUdr7
Hobywing Motor: https://www.banggood.com/custlink/Dv3mrI2RtG
Diatone Motor: https://www.banggood.com/custlink/vvGmrZ2yPd
BrotherHobby Motor: https://www.banggood.com/custlink/G333cIUyOd
Caddx Camera: https://www.banggood.com/custlink/m3DGcS2YV8
Runcam Camera: https://www.banggood.com/custlink/mGKKWZ2EHg
Foxeer Camera: https://www.banggood.com/custlink/DDGGWI2y52
| FS_A-Tail_R1.stl | 4.6MB | |
| FS_Main_Body_R1.stl | 4.3MB | |
| FS_Skirt.stl | 2.7MB | |
| FS_Skirt_R1.stl | 3.2MB | |
| FS_Top_Plate_R1.stl | 867.2KB | |
| FS_V-Tail_R1.stl | 3.0MB | |
| FS_V-Tail_R2.stl | 3.5MB |
![The Microblivion [65mm / Toothpick] 3D Printer Model](https://cdn.3axis.co/assets/79/26/4d/ba/79264dba-d87a-4ea9-bba6-afbad44b27f9/images/8fc65be1-5116-4a05-ae61-98838d06451e_thumb.jpg)
