The file 'Flying Peach – Microswift Evolution 3D Printer Model' is (stl) file type, size is 4.4MB.
Here comes the "Flying Peach Microswift Evolution" based on my earlier project "Flying Peach", 130mm frame from MyRcMart.com, 1407 brushless motors, 3inch props, Piko BLX, Runcam Microswift or Sparrow and Eachine VTX 03.
The pod of this little beast was redesigned to be printed in flex material and to fit the new fantastic Runcam Microswift or Sparrow camera with a 35° view angle.
See by yourself how fun this little quad seems to be...
https://www.youtube.com/watch?v=6ewJnsJ25VI
The pod requires to be printed in flex material so the camera and Vtx can fit in without any problem, this provides also a much better protection against crashes.
As the frame was designed for 30.5-30.5 flight controller, please use the provided "Support_Piko_BLX" printed in TPU or other flex material to mount the 20-20 flight controller and help with vibrations.
Components:
Frame
http://www.myrcmart.com/rcx-x130-fpv-racing-frame-3k-carbon-p-9645.html
Flight Controler PikoBLX
Esc's Littlebee 20amp BlHeliS
Receiver FrSky or Flysky
or
https://www.banggood.com/FrSky-XM-2_4G-16CH-Telemetry-Receiver-p-1107435.html?p=MY23025537272201607R
or
Motors Brotherhobby 1407 3600kv or XNova 1407 3500kv
Camera Runcam Microswift or Sparrow
or
or
Eachine VTX 03
M3 Screws
Buzzer
Heat Shrink Tubes
Props
or
Battery
4S 850mah - 4S 650mah - 3S 500mah
-
Thanks to Microdure and Brax for their precious help and printing of the prototype
Pod_Flying_Peach_Microswift_Evolution.stl | 8.8MB | |
TPU_Bottom_Washer_-_Flying_Peach.stl | 936.9KB | |
Tpu_Support_Piko_BLX_-_Flying_Peach.stl | 573.3KB |