FlyDiGi Vader 4 Pro Replacement Original Rear Buttons. 3D Printer Model
The file 'FlyDiGi Vader 4 Pro Replacement Original Rear Buttons. 3D Printer Model' is (step,stl) file type, size is 917.4KB.
The file 'FlyDiGi Vader 4 Pro Replacement Original Rear Buttons. 3D Printer Model' is (step,stl) file type, size is 917.4KB.
Here is is a copy of the rear button mechanism for the FlyDiGi Vader 4 Pro. Remove the 4 screws from the back of the controller, use a plastic spudger to open the controller at the seam, remove their mechanism and replace it with this one. Be sure to press them firmly onto the pins. These have not been extensively tested. Supports must be on.
| Vader_4_Pro_Original_Rear_Buttons.step | 1.5MB | |
| Vader_4_Pro_Original_Rear_Buttons.stl | 1.4MB |
![Knifey [Toy Story] 3D Printer Model](https://cdn.3axis.co/assets/fb/32/6e/80/fb326e80-7e1a-4646-a4b9-22c62237b718/images/b45604ac-2887-4383-9a78-b2b3a2a2b28c_thumb.jpg)
