FlyDiGi Vader 3 And 4 Pro Back Paddle Mod !!!! NOW VERSION 5 !!!! 3D Printer Model
The file 'FlyDiGi Vader 3 And 4 Pro Back Paddle Mod !!!! NOW VERSION 5 !!!! 3D Printer Model' is (step,stl,zip,3mf) file type, size is 11.1MB.
The file 'FlyDiGi Vader 3 And 4 Pro Back Paddle Mod !!!! NOW VERSION 5 !!!! 3D Printer Model' is (step,stl,zip,3mf) file type, size is 11.1MB.
This modification can be purchased on my Etsy store through this link for $12.99
https://vader4pro.notus.gg/
12/11/24 - Files have been updated to version 5
Install walkthrough video:
https://www.youtube.com/watch?v=cY32_36pInw&ab_channel=Notus
This is an easy install back paddle modification for the FlyDiGi Vader 4 Pro gaming controller. It is a drop in replacement for the stock back buttons on the controller designed to feel similar to the Xbox Elite 2 paddles. The actuation feels perfect and the clicks are satisfying and consistant.
Simply remove the 4 screws from the rear of the controller, pry the controller apart at the seam, remove the plastic spring (buttons attached), and replace it with this print.
This will require 4 m2*6 screws.
PRINT SETTINGS:
Layer Height: .08
Walls: 4
Infill: 100:
Supports: Yes -
Only on buid plate.
Top Z Distance .2
| Loftable_Adjustable_Paddle_Ends_Vader_4_Pro_FOR_EDITING.step | 66.3KB | |
| Long_Left_Paddle.stl | 809.5KB | |
| Long_Right_Paddle.stl | 815.7KB | |
| Mode_Switch.stl | 773.8KB | |
| Short_Left_Paddle.stl | 1.0MB | |
| Short_Right_Paddle.stl | 1.0MB | |
| v5_Spring+Outer_Paddles.stl | 2.7MB | |
| VADER_BACK_PADDLE_MOD.zip | 5.6MB | |
| Vader_Paddle_Mod_V5_3mf.3mf | 2.0MB | |
| Vader_Paddle_Mod_V5_STEP.step | 2.5MB |
