Raises the Spec V light by about 1.25 inches over the factory light position that is right up against the lid.
The other versions are too tall for my use. I intend to modify a autofeeder mount to sit on top of the light at the far end to drop food down a shoot into the opening.
2 Versions are provided here (both have the same position, just different cosmetically):
v2 is what I've shown here and printed as I like the more rounded look that you see above the tank. This one will have to be printed on its side with tree supports (see the screenshot from Orcaslicer with the painted areas I did for support on the two 'fingers' and the oval cut out for the thumb-turn screw.)
v1 can be printed on its end (as shown in the screenshot) with no support.
I suggest a brim of some amount for each just for some security in printing.
Design inspired by Energizer357's Fluval Spec V Light Extension V2 (Updated)
Found here: https://www.thingiverse.com/thing:5003457
| Fluval_Spec_V_Light_Riser_1.25in_v1.stl | 229.6KB | |
| Fluval_Spec_V_Light_Riser_1.25in_v2.stl | 386.7KB |
