FlushFit 3/4” S40 Connectors 3D Printer Model
The file 'FlushFit 3/4” S40 Connectors 3D Printer Model' is (stl) file type, size is 5.3MB.
The file 'FlushFit 3/4” S40 Connectors 3D Printer Model' is (stl) file type, size is 5.3MB.
A collection of flush connectors to join 3/4” Sch 40 PVC pipes in a flush fashion. The connectors insert INSIDE the pipes with a snug friction-fit so that the outside can remain flush for a clean presentation. These were specifically designed for use in synchronized Christmas lighting to outline window and door frames with bullet pixels, but let your imagination run wild.
Note: some of the unusual angles are for Isosceles triangles and stars.
| Three-Quarter_Inch_PVC_108º_Elbow_Sch_40_Flush_-_Friction_Fit.stl | 1.7MB | |
| Three-Quarter_Inch_PVC_144º_Elbow_Sch_40_Flush_-_Friction_Fit.stl | 1.9MB | |
| Three-Quarter_Inch_PVC_22.5º_Elbow_Sch_40_Flush_-_Friction_Fit.stl | 1.3MB | |
| Three-Quarter_Inch_PVC_30º_Elbow_Sch_40_Flush_-_Friction_Fit.stl | 1.3MB | |
| Three-Quarter_Inch_PVC_36º_Elbow_Sch_40_Flush_-_Friction_Fit.stl | 1.3MB | |
| Three-Quarter_Inch_PVC_45º_Elbow_Sch_40_Flush_-_Friction_Fit.stl | 1.4MB | |
| Three-Quarter_Inch_PVC_60º_Elbow_Sch_40_Flush_-_Friction_Fit.stl | 1.4MB | |
| Three-Quarter_Inch_PVC_72º_Elbow_Sch_40_Flush_-_Friction_Fit.stl | 1.5MB | |
| Three-Quarter_Inch_PVC_90º_Elbow_Sch_40_Flush_-_Friction_Fit.stl | 1.6MB | |
| Three-Quarter_Inch_PVC_Coupler_Sch_40_Flush_-_Friction_Fit.stl | 1.1MB | |
| Three-Quarter_Inch_PVC_Tee_Sch_40_Flush_-_Friction_Fit.stl | 2.2MB |
