FlushFit 1/2 S40 Connectors 3D Printer Model
The file 'FlushFit 1/2 S40 Connectors 3D Printer Model' is (stl) file type, size is 2.6MB.
The file 'FlushFit 1/2 S40 Connectors 3D Printer Model' is (stl) file type, size is 2.6MB.
A collection of flush connectors to join 1/2” Sch 40 PVC pipes in a flush fashion. The connectors insert INSIDE the pipes with a snug friction-fit so that the outside can remain flush for a clean presentation. These were specifically designed for use in synchronized Christmas lighting to outline window and door frames with bullet pixels, but let your imagination run wild.
Note: some of the unusual angles are for Isosceles triangles and stars.
| Half-Inch_PVC_108º_Elbow_Sch_40_Flush_-_Friction_Fit.stl | 1.7MB | |
| Half-Inch_PVC_144º_Elbow_Sch_40_Flush_-_Friction_Fit.stl | 1.9MB | |
| Half-Inch_PVC_22.5º_Elbow_Sch_40_Flush_-_Friction_Fit.stl | 244.3KB | |
| Half-Inch_PVC_30º_Elbow_Sch_40_Flush_-_Friction_Fit.stl | 251.3KB | |
| Half-Inch_PVC_36º_Elbow_Sch_40_Flush_-_Friction_Fit.stl | 1.3MB | |
| Half-Inch_PVC_45º_Elbow_Sch_40_Flush_-_Friction_Fit.stl | 268.4KB | |
| Half-Inch_PVC_60º_Elbow_Sch_40_Flush_-_Friction_Fit.stl | 268.4KB | |
| Half-Inch_PVC_72º_Elbow_Sch_40_Flush_-_Friction_Fit.stl | 1.5MB | |
| Half-Inch_PVC_90º_Elbow_Sch_40_Flush_-_Friction_Fit.stl | 294.7KB | |
| Half-Inch_PVC_Coupler_Sch_40_Flush_-_Friction_Fit.stl | 204.0KB | |
| Half-Inch_PVC_Tee_Sch_40_Flush_-_Friction_Fit.stl | 429.4KB |
