FlushFit 1/2” Thin-wall Connectors 3D Printer Model
The file 'FlushFit 1/2” Thin-wall Connectors 3D Printer Model' is (stl) file type, size is 2.0MB.
The file 'FlushFit 1/2” Thin-wall Connectors 3D Printer Model' is (stl) file type, size is 2.0MB.
A collection of flush connectors to join 1/2” thin-wall PVC pipes in a flush fashion. The connectors insert INSIDE the pipes with a snug friction-fit so that the outside can remain flush for a clean presentation. These were specifically designed for use in synchronized Christmas lighting to outline window and door frames with bullet pixels, but let your imagination run wild.
Note: some of the unusual angles are for Isosceles triangles and stars.
| Half-Inch_Thin-Wall_22.5º_Elbow_Flush_-_Friction_Fit.stl | 1.3MB | |
| Half-Inch_Thin-Wall_30º_Elbow_Flush_-_Friction_Fit.stl | 1.3MB | |
| Half-Inch_Thin-Wall_45º_Elbow_Flush_-_Friction_Fit.stl | 1.4MB | |
| Half-Inch_Thin-Wall_60º_Elbow_Flush_-_Friction_Fit.stl | 1.4MB | |
| Half-Inch_Thin-Wall_90º_Elbow_Flush_-_Friction_Fit.stl | 294.3KB | |
| Half-Inch_Thin-Wall_Coupler_Flush_-_Friction_Fit.stl | 204.0KB | |
| Half-Inch_Thin-Wall_Tee_Flush_-_Friction_Fit.stl | 451.4KB |
