Flsun Q5 Mini Sherpa Direct Drive
The extruder is angle mounted allowing full movement on the bed
House in a single printable piece, supports are necessary, if you print it upside down less support material
Piece of PTFE guided tube for smooth filament movement
House vents are designed to drive hot air away bed
For the supplied duct, the mod for drilling and tap the effector with M3 is necessary. First print the duct, it will serve as a template. See here for other sizes available:
https://www.printables.com/es/model/772141-flsun-q5-duct
Material Need:
4x M3 Brass inserts of OD4.5mm Length 5mm
Piece of PTFE tube
about 320 grams of total weight
Enjoy
| Q5Duct13R2.stl | 350.5KB | |
| Q5HouseSherpa15A.stl | 405.7KB |
