This is COREXY modification of my Flsun cube. It is fusion of many designs I fonud on thingivers. Here is the list used and modified designs:
HyperCube Evolution
https://www.thingiverse.com/thing:2254103
Hypercube Evolution 2020
https://www.thingiverse.com/thing:2452700
Hypercube and hevo parts
https://www.thingiverse.com/thing:2610667
Hypercube Evolution Dual Side Idler/Pulley
https://www.thingiverse.com/thing:2830266
Missing parts you find in original HyperCube Evolution parts
14.9.2018
Add new photo of HEVO build progress. For covering I use painted 1.5mm steel plete. Main reasou is mechanical stabilyty of aluminium construction. Side covers are in the progress. Add design of oldschool Z end stop holder.
16.9.2018
Update version of cooling duct
18.9.2018
Parts list
For this modification you can use most of the original parts a screws but is necessary buy some extra parts. Some original parts is necessary modify (change length of linear shafts atc.)
2x X linear shafts 8x485mm
6x 20T pulley tooth for 3mm shaft
2x 20T pulley smooth for 3mm shaft
2x 2m 6mm 2GT GT2 RF Fiber Glass Reinforced Rubber Timing Belt
2x LM8LUU Long Linear Motion Ball Bearing
1x Fan Delta BFB0512HH
2x 2020 Aluminum Profile 460mm
30x M4 T Nut
30x Allen screw M4x12
30x Washer 4x12
12x Allen screw M3x20
18x Nut M3
6x Allen screw M3x30
6x Allen screw M3x8
21.9.2018
Installation of MKS TFT32_L V4.0 finished. Uploaded stl file of the dispalay case. It is modificated design:
https://www.thingiverse.com/thing:1592440
27.9.2018
New extruder design. I made this modification for more compact and balanced design with extruder most mossible neer to the linear shafts. All this for reduction the leaver forces on the linear shafts from extruder nozzle. Extruder is placed about 10mm above then original HEVO holder for maximalization Z format. All Extruder holder is made for E3D V6 China clone extruder.
Add shorter bracket for MKS TFT box.
1.10.2018
New switch for light with the label. Button type is SPDT Black Red Button possibly buy on eBay.
21.10.2018
Final Update :o)
This is my last update. I upload cover for power switch, covers for power supplyes, filament sensor, extruder holder and label for light switch. I had troubles with KMS TFT so I change it for KMS MINI display. KMS TFT has the problem with command M600 which I wery like. Printer has two power supplies 12V for hotbed and hotend, 24V is for electronic board and motor drivers. For the connection between E3D and extruder motor i use 3mm nilon string for nice arc on bovden a elctric wires.
Spool holder:
https://www.thingiverse.com/thing:3020026
Printing result is perfect. I only change filament and printing :)
| Extruder_holder_FoxMod_v2.stl | 306.1KB | |
| Filament_sensor.stl | 168.1KB | |
| Filament_sensor_cover.stl | 78.6KB | |
| HEVO_Extruder_v2-Blower_Holder.stl | 163.0KB | |
| HEVO_Extruder_v2-Duct.stl | 59.8KB | |
| HEVO_Extruder_v2-Duct5.stl | 251.0KB | |
| HEVO_Extruder_v2-E3dv6_Holder.stl | 141.5KB | |
| HEVO_Extruder_v2_Clamp.stl | 110.9KB | |
| HEVO_XY_motor_holder_L.stl | 330.2KB | |
| HEVO_XY_motor_holder_R.stl | 330.2KB | |
| HEVO_Y_End_stop_holder.stl | 83.3KB | |
| HEVO_Z_End_stop_holder.stl | 101.4KB | |
| HEVO_Z_shaft_holder.stl | 193.2KB | |
| Light_label.stl | 109.0KB | |
| MKSMini_back_mod.stl | 129.1KB | |
| MKS_Mini_front_mod.stl | 90.5KB | |
| PowerSupply_cover.stl | 1.9MB | |
| PowerSupply_cover_small.stl | 1.5MB | |
| Power_switch_cover.stl | 32.1KB | |
| StringHolder.stl | 85.5KB | |
| StringHolderClamp.stl | 72.7KB | |
| StringHolderExtruder.stl | 144.6KB | |
| XY_idler_holder_L_FoxMod.stl | 331.7KB | |
| XY_idler_holder_L_FoxMod_v2.stl | 501.4KB | |
| XY_idler_holder_R_FoxMod.stl | 331.7KB | |
| XY_idler_holder_R_FoxMod_v2.stl | 501.4KB | |
| X_Carriage_1.0_FoxMod.stl | 567.3KB | |
| Y_Carriage_xDia8_LM8UU__FoxMod.stl | 309.4KB |
