Flower Lamp 3D Printer Model
The file 'Flower Lamp 3D Printer Model' is (zip,stl) file type, size is 56.5MB.
The file 'Flower Lamp 3D Printer Model' is (zip,stl) file type, size is 56.5MB.
Flower Lamp
This Lamp is inspired by a flower
The main body is made out of two parts printed in spiral vase mode.
The first part is green and acts as a basis.
The second part is red and acts as the blossom part.
Inside this red blossom part the LED’s are situated.
The light effects are partially created by three separated LED’s
One LED is red, one green and one is blue. In this case I used 1watt LED’s.
Then these LED’s are separated from each other with equal distance from each other.
Also these LED’s are glued with thermal compound to an aluminum plate that fits into the red blossom part.
This is for cooling and to keep them apart.
I will make a model of this LED part soon in the future, because people keep asking how it works.
Because I like to experiment with light, I made it so, that you can put other lampshades ore objects into the blossom parts.
This creates a lot of cool light effects, which are ever changing depending on the form of the placed objects.
I tried to capture these effects on the photos.But it loses a lot on the photos …
There are some shots of the sealing also. Also I added some photos of the flower lamp with some other objects and lamp shades in it.
I experimented with lampshades and vases that are posted already and there are 2 that I didn’t post
(the one in the photos that is printed in translucent PET-G and the one printed in translucent transparent PET-G).
They are also included as optional STL files.
But of course you can also use this lamp in its basic form or make your own custom lamp :-) .
| first_part_BASIS.zip | 17.8MB | |
| fourth_part_transparant_PET-G_one.zip | 9.2MB | |
| second_part_BLOSSOM.zip | 17.1MB | |
| stl_in_zip_file.stl | 369.8KB | |
| tirth_part_BLUE_PET-G_one.zip | 13.0MB |
