Floral Symmetry HueForge 3D Printer Model
The file 'Floral Symmetry HueForge 3D Printer Model' is (stl) file type, size is 32.1MB.
The file 'Floral Symmetry HueForge 3D Printer Model' is (stl) file type, size is 32.1MB.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA PolyLite Orange Transmission Distance: 7.5
PLA PolyLite White Transmission Distance: 5
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Orange
At layer #16 (1.36mm) swap to White for the rest.
| symmetrical_flowers_Front_200x200.stl | 95.9MB |
