Floating Plant Pot 3D Printer Model
The file 'Floating Plant Pot 3D Printer Model' is (stl,f3d) file type, size is 1.8MB.
The file 'Floating Plant Pot 3D Printer Model' is (stl,f3d) file type, size is 1.8MB.
Hey guys I hope you like this design for a floating plant pot.
The space between the center parts should be 20mm.
The max weight is 345g.
The hole size is 1.4mm but when printed is goes down to 0.75 so use a string of 0.5 to 0.6mm in diameter, if you can get a multithread cord works best.
Only use supports for the middle bits that hang the rest of the part and the channel at the bottom of the foot doesn't require support at all.
Box needs to be printed upside down so that you don't have to do any cleaning to ensure the box and the foot fit properly.
When feeding through the thread for the 8 holes on the bends of the square the whole thread needs to be in a continuous pattern, what I mean by this is that you DON'T use 4 small threads to hold the system together. if you do that you will find it really hard for obtaining the right balance when the plant is on it.
please see images
I have included the f3d files too.
I will also make new pots soon
if you have any suggestions feel free to comment below.
If you want to invite me for a cup of coffee:
[email protected] - Paypal
Other than that enjoy and I hope you find it intriguing and useful.
MrJefferson105 - Youtube
| BottomLeg.stl | 473.5KB | |
| Floating_Plant_Pot_.f3d | 1.5MB | |
| Plant_Pot.stl | 264.7KB | |
| TopLeg.stl | 472.2KB |
