A small and simple feeder ring for your aquarium. It floats as long as there are air bubbles in the chambers under the ring, so print it carefully without holes.
Use two pieces of 1.75mm Filament to make the bolts, and sqeeze it at the ends with pliers.
You can use a piece of double-sided adhesive to stick the patch to the glas
| Connector_V2.stl | 58.5KB | |
| Futterring_V2.stl | 2.7MB | |
| Patch_V2.stl | 62.6KB | |
| Ring_V2.stl | 2.6MB |
