Float Switch Bracket 3D Printer Model Free Download

Description Files (4)

Summary

This is a bracket to hold float switches on a rimless aquarium. It could work in other situations where the container doesn't have a large lip. The mount is adjustable allowing you to set the desired switch position. I recommend using nylon hardware for the nut and screw to avoid rust.

I've included OpenSCAD files that allow you to adjust the following characteristics:

Bracket:

length - the longer the bracket the more available range (default 60)
width - sets the width of the bracket (default 25)
switchRadius - how large the hole is for the switch (default 5)
switchArmLength - how far out the switch can be heald (default 30)

Mount:

width - width of the mount (default 25)
baseLength - how far the back of the mount extends down the back of the tank (default 50)
glassThickness - thickness of the glass (default 6)
clipLength - how far the inside of the clip extends down into the tank (I try to keep this out of the water) (default 20)
screwDiameter - size of the screw hole (default 3)

Here's a link to the openSCAD code on github if you want to suggest a revision https://github.com/mjrsnyder/FloatSwitchBracket

Enjoy!

Float_Switch_Bracket.scad	1.1KB
Float_Switch_Bracket.stl	39.3KB
Float_Switch_Mount.scad	803.0B
Float_Switch_Mount.stl	34.9KB

Float Switch Bracket 3D Printer Model

Summary

Tags

You might also like