Flipper Zero – Wi-Fi Dev Board Case (Basic) 3D Printer Model Free Download

Description Files (8)

Summary

This print is specifically designed for the basic WiFi board straight out of the box, omitting features such as the antenna and SD card slot.

This creation is a remix of magdong's Wi-Fi Dev Board Case (https://www.thingiverse.com/thing:5564906).

For secure assembly, utilize 4 x M3x12mm screws accompanied by 4 x M3 nuts.

This design also has a pin protector boot cover that can be found in the following locations:

https://www.thingiverse.com/thing:6104552
https://www.printables.com/model/606861
https://github.com/CodyTolene/3D-Printing/tree/main/Flipper%20Zero%20-%20WiFi%20Dev%20Board%20Case%20Boot%20Cover
My print settings:
Hatchbox PLA
0.2mm layer height
0.4mm nozzle (line width)
Enable retraction
Wall count 3 (+ print thin walls enabled)
Top/bottom layers: 4
Infill density: 20%
Infill pattern: Cubic
Print temp 200 C
Bed temp 60 C
No supports needed

Flipper_Zero_WiFi_Dev_Board_Case_Bottom.3mf	98.1KB
Flipper_Zero_WiFi_Dev_Board_Case_Bottom.stl	276.7KB
Flipper_Zero_WiFi_Dev_Board_Case_Top.3mf	58.8KB
Flipper_Zero_WiFi_Dev_Board_Case_Top.stl	173.8KB
Flipper_Zero_WiFi_Dev_Board_Case_Top_and_Bottom.3mf	133.7KB
Flipper_Zero_WiFi_Dev_Board_Case_Top_and_Bottom.stl	450.5KB
Flipper_Zero_WiFi_Dev_Board_Case_Top_Closed.3mf	59.2KB
Flipper_Zero_WiFi_Dev_Board_Case_Top_Closed.stl	184.8KB