This is the second version of my throttle Quadrant, inspired by WII warbirds (supermarine-spitfire, p-51 etc...). It's a compact and modular flight sim controller.
This design allows easy modifications like the levers order (right or left handed).
You need :
-Screws
3X 6mm Countersunk Bold M6x25
6X 6mm Hexa Bold M6x30
2X 142mm threaded rod M6
4X 4mm Countersunk Bold M4x20
3X 4mm Countersunk Bold M4x25
3X ball bearings MF126ZZ 6x12x4mm
20mm Adhesive Eva Band for friction
Electronic
6X n52 5x3mm neodymium magnets
3X Allegro 1302 Hall Sensors
Encoders, push buttons, momentary on/off/on switches
1X Arduino Pro Micro
My arduino code, is not already clean so I'm looking for help to do that, you can contact me if you are curious about this project ;) But it still work well !
Contact me if you need precisions.
Enjoy !
| 10-levier-angle-90.stl | 66.1KB | |
| 10-levier-gaz.stl | 51.8KB | |
| 10-poignée-gaz.stl | 203.5KB | |
| 10-porte-hall.stl | 102.6KB | |
| 11-ball-lever.stl | 959.8KB | |
| 11-bouchon-throttle.stl | 715.3KB | |
| 11-encodeur-cap.stl | 777.6KB | |
| 11-entretoise.stl | 153.0KB | |
| 11-Frein-light.stl | 69.1KB | |
| 11-lever-droit.stl | 49.2KB | |
| 11-platine-axe-roulement-versionpleintest.stl | 179.6KB | |
| 11-porte-aimant.stl | 183.7KB |
