FlighSim Landing Gear Lever With Detent 3D Printer Model
The file 'FlighSim Landing Gear Lever With Detent 3D Printer Model' is (stl) file type, size is 1.1MB.
The file 'FlighSim Landing Gear Lever With Detent 3D Printer Model' is (stl) file type, size is 1.1MB.
FlighSim Landing Gear Lever with detent
it simulates landing gear levers like the unes used by boeing aircraft. It includes a detent on the top for the "landing gear UP" position and another at the bottom for the "Down" position.
It can be easlily printed and asembled with m3 and m4 screws.
The electronics can be salvaged from an old pc controller, or you can use an arduino too.
For buttons you will need 2 tactile switches and the rest will be at your desire.
Al the bottom you can find the hole for the cable with a cap that can keep it secure.
Side holes can be use to mount it to a desk clamp or any type of M8 hole or mount you can create.
For donations to keep designing please contact me at [email protected]. I would love to live of this some day!
Thanks in advance and cheers from Argentina!
| Back_Box.stl | 506.3KB | |
| Box_Ball.stl | 5.8MB | |
| Box_LEAD.stl | 1.5MB | |
| Box_LITTLECAP.stl | 1.8MB | |
| Handle_Lever.stl | 1.2MB | |
| L_Handle_gide.stl | 487.7KB | |
| R_Handle_gide.stl | 240.7KB |
