Flexible Mobilephone/cellphone Mount On Computer Monitor 3D Printer Model
The file 'Flexible Mobilephone/cellphone Mount On Computer Monitor 3D Printer Model' is (STL) file type, size is 34.0MB.
The file 'Flexible Mobilephone/cellphone Mount On Computer Monitor 3D Printer Model' is (STL) file type, size is 34.0MB.
A flexible phone mount, suitable for most phones ( maximum width 82.5mm, maximum thickness 9.6mm)
This is a evolution version of my previous mount. This mount may be used on a monitor when you are working or in power charging. It also can be used as a table phone support when in leisure time.
You need some glue to fix the center ring and limit bar onto the base.
The hold arm and the roller can be pushed in slowly.
It will be a little difficult to apart the back support from the connector body, do this work carefully.
When you slice the base, do remember don't generate support automatically, please add support by hand, only supports showed as the picture needed!!!
Please use 12mm double tape when you fix the bar onto your monitor.
Enjoy it!
| Bar+Rotation_Bar.STL | 1.3MB | |
| Base-3.STL | 6.4MB | |
| Center_Ring-1.STL | 211.0KB | |
| Connector+Support.STL | 6.2MB | |
| Hold_Arm.STL | 62.4MB | |
| Limit_Bar.STL | 2.5MB | |
| Pen_Holder-2.STL | 16.6MB | |
| Roller-1.STL | 2.9MB |
