Flexible Mini Greenhouse-Dome With Pot (clickable) 3D Printer Model
The file 'Flexible Mini Greenhouse-Dome With Pot (clickable) 3D Printer Model' is (stl) file type, size is 151.1KB.
The file 'Flexible Mini Greenhouse-Dome With Pot (clickable) 3D Printer Model' is (stl) file type, size is 151.1KB.
Flexible Mini Greenhouse-Dome with Pot (clickable)
(Flexibler Treibhausdom mit Topf für Kräuter und Pflanzen - zusammensteckbar)
Your seed, herbs and plants also need a warm environment?
This is my second Greenhouse-Dome based on the same concept as my larger "Greenhouse-Dome (clickable) / Treibhausdom": http://www.thingiverse.com/thing:1482704
Based on the two Micro-dome parts hexa and penta from obijuan, i made this Mini Greenhouse-Dome with Pot. With the parts here you can build a full small greenhouse-dome (diameter ca. 19,5 cm)! All you need is a piece of PVC foil and a 3D printer. Even the connecting pieces can be printed. And the whole Greenhouse-Dome can be easy plugged together!
This Mini Greenhouse-Dome is not as flexible as my first dome in diameter but it has its own plant pot, is flexible in height (when your plants growing, it can be easily enlarged ..) and can be labeled with a sign on the dom. So ideal for herbs and small plants.
For one Mini Greenhouse-Dome, you need the following parts + a pvc-foil:
10x hexa (MGD-01)
6x penta (MGD-02)
Or with a sign on the Dome-Top: 5x penta (MGD-02) + 1x penta-special (MGD-40) + 1x penta-sign-holder (MGD-41) + a sign (MGD-42, MGD-43, MGD-44, MGD-45 or your own > see Print Settings)
10x hexa-Y (MGD-04)
10x T-End-for-foil (MGD-05)
10x Folienklammer_fuer_T-End (MGD-06)
30x A-Connector (MGD-10)
45x B-Connector (MGD-11)
10x A-,B-,C- or D-Connector (MGD-10, MGD-11, MGD-12 or MGD-13) or your own length for flexible height.
1x Pot-NEW (MGD-20)
Diameter: 19 x 19,5 cm
Height: flexible, from ca. 19 cm
How the whole Dome is put together, you can see here (2V/L2 Icosahedron Dome):
https://simplydifferently.org/Geodesic_Dome_Notes?page=3#2V/L2
Updates:
24.04.2016:
I added a new part (MGD-07 "Folienklammer_lang_fuer_T-End"). If you have printed the old plant pot or the dom with the foil not fit nice into the pot, try this part instead of MGD-06.
Improvements to the plant pot. New upload MGD-20_pot_NEW. Not tested but should fit better to the dome. Feedback are welcome!
------------------------
If you have no 3D-printer, you can buy a printed set and more parts here:
www.shapeways.com/shops/designgravity (Mini Dome parts)
------------------------
| FmGDwP_MGD-01_hexa.stl | 45.1KB | |
| FmGDwP_MGD-02_penta.stl | 42.1KB | |
| FmGDwP_MGD-03_hexa-Y.stl | 10.7KB | |
| FmGDwP_MGD-04_T-End-for-without-foil.stl | 42.1KB | |
| FmGDwP_MGD-05_T-End-for-foil.stl | 10.0KB | |
| FmGDwP_MGD-06_Folienklammer_fuer_T-End.stl | 16.1KB | |
| FmGDwP_MGD-07_Folienklammer_lang_fuer_T-End.stl | 20.2KB | |
| FmGDwP_MGD-10_Verbindungsstab-A_43.7mm.stl | 2.2KB | |
| FmGDwP_MGD-11_Verbindungsstab-B_49.4mm.stl | 2.2KB | |
| FmGDwP_MGD-12_Verbindungsstab-C_25mm.stl | 2.2KB | |
| FmGDwP_MGD-13_Verbindungsstab-D_80mm.stl | 2.2KB | |
| FmGDwP_MGD-20_pot_NEW.stl | 25.8KB | |
| FmGDwP_MGD-40_penta-special_top_for_sign.stl | 12.4KB | |
| FmGDwP_MGD-41_penta_sign_holder_outside.stl | 8.2KB | |
| FmGDwP_MGD-42_Plant_Sign_blank.stl | 6.3KB | |
| FmGDwP_MGD-43_Plant_Sign_blank_2.stl | 4.3KB | |
| FmGDwP_MGD-44_Plant_Sign_Basilico.stl | 734.0KB | |
| FmGDwP_MGD-45_Plant_Sign_Basilikum.stl | 372.8KB | |
| FmGDwP_MGD-46_penta_cap_outside.stl | 7.4KB |
