Flexi Rex with movable jaw. Just give it a bite!
Close the mouth, and then open it.
Repeat the above procedure until the jaw is free to move.
Jaw gaps 0.30mm(da Vinci Jr.1.0A & CR-10S) and 0.50mm(da Vinci mini w) are suggested for 100% printing.
Try test-gap things (Rex pencil top https://www.thingiverse.com/thing:3263585 or Rex keychain https://www.thingiverse.com/thing:3395707) first to ensure the acceptable jaw gap of your machine.
Larger gap can be used for smaller-scaled printing, and smaller gap can be used for larger-scaled printing.
| Flexi-Rex_movable_jaw_gap0.15mm.stl | 1.1MB | |
| Flexi-Rex_movable_jaw_gap0.20mm.stl | 1.1MB | |
| Flexi-Rex_movable_jaw_gap0.25mm.stl | 1.1MB | |
| Flexi-Rex_movable_jaw_gap0.30mm.stl | 1.1MB | |
| Flexi-Rex_movable_jaw_gap0.35mm.stl | 1.1MB | |
| Flexi-Rex_movable_jaw_gap0.40mm.stl | 1.1MB | |
| Flexi-Rex_movable_jaw_gap0.50mm.stl | 1.1MB | |
| Flexi-Rex_movable_jaw_keychain_gap0.15mm.stl | 1.4MB | |
| Flexi-Rex_movable_jaw_keychain_gap0.20mm.stl | 1.4MB | |
| Flexi-Rex_movable_jaw_keychain_gap0.25mm.stl | 1.4MB | |
| Flexi-Rex_movable_jaw_keychain_gap0.30mm.stl | 1.4MB | |
| Flexi-Rex_movable_jaw_keychain_gap0.35mm.stl | 1.4MB | |
| Flexi-Rex_movable_jaw_keychain_gap0.40mm.stl | 1.4MB | |
| Flexi-Rex_movable_jaw_keychain_gap0.50mm.stl | 1.4MB |
![Knifey [Toy Story] 3D Printer Model](https://cdn.3axis.co/assets/fb/32/6e/80/fb326e80-7e1a-4646-a4b9-22c62237b718/images/b45604ac-2887-4383-9a78-b2b3a2a2b28c_thumb.jpg)
