Flexi-Rex (Movable Jaw)(Dual-Extrusion) 3D Printer Model
The file 'Flexi-Rex (Movable Jaw)(Dual-Extrusion) 3D Printer Model' is (stl) file type, size is 6.8MB.
The file 'Flexi-Rex (Movable Jaw)(Dual-Extrusion) 3D Printer Model' is (stl) file type, size is 6.8MB.
This was remixed from hsiehty's Flexi Rex with movable jaw I split the file for a two color printing.
Larger gap can be used for smaller-scaled printing, and smaller gap can be used for larger-scaled printing.
Be sure to check out all my other designs and follow me here at Polymathic Designs.
Post your makes of this, I would love to see them.
Feel free to ask any questions about printing or to make requests.
ONLY WORKS WITH DUAL-EXTRUSION PRINTERS go to the original model for the single color version.
| Flexi_Rex_0.15mm_1.stl | 682.2KB | |
| Flexi_Rex_0.15mm_2.stl | 401.8KB | |
| Flexi_Rex_0.20mm_1.stl | 682.2KB | |
| Flexi_Rex_0.20mm_2.stl | 402.5KB | |
| Flexi_Rex_0.25mm_1.stl | 682.2KB | |
| Flexi_Rex_0.25mm_2.stl | 402.4KB | |
| Flexi_Rex_0.30mm_1.stl | 682.2KB | |
| Flexi_Rex_0.30mm_2.stl | 401.1KB | |
| Flexi_Rex_0.35mm_1.stl | 682.2KB | |
| Flexi_Rex_0.35mm_2.stl | 401.9KB | |
| Flexi_Rex_0.40mm_1.stl | 682.2KB | |
| Flexi_Rex_0.40mm_2.stl | 399.0KB | |
| Flexi_Rex_0.50mm_1.stl | 682.2KB | |
| Flexi_Rex_0.50mm_2.stl | 397.9KB | |
| Flexi_Rex_Keychain_0.15mm_1.stl | 1002.5KB | |
| Flexi_Rex_Keychain_0.15mm_2.stl | 401.8KB | |
| Flexi_Rex_Keychain_0.20mm_1.stl | 1002.5KB | |
| Flexi_Rex_Keychain_0.20mm_2.stl | 402.5KB | |
| Flexi_Rex_Keychain_0.25mm_1.stl | 1002.5KB | |
| Flexi_Rex_Keychain_0.25mm_2.stl | 402.4KB | |
| Flexi_Rex_Keychain_0.30mm_1.stl | 1002.5KB | |
| Flexi_Rex_Keychain_0.30mm_2.stl | 401.1KB | |
| Flexi_Rex_Keychain_0.35mm_1.stl | 1002.5KB | |
| Flexi_Rex_Keychain_0.35mm_2.stl | 401.9KB | |
| Flexi_Rex_Keychain_0.40mm_1.stl | 1002.5KB | |
| Flexi_Rex_Keychain_0.40mm_2.stl | 399.0KB | |
| Flexi_Rex_Keychain_0.50mm_1.stl | 1002.5KB | |
| Flexi_Rex_Keychain_0.50mm_2.stl | 397.9KB |
