Flexi Raptor Santa Hat 3D Printer Model
The file 'Flexi Raptor Santa Hat 3D Printer Model' is (stl) file type, size is 192.17 KB.
The file 'Flexi Raptor Santa Hat 3D Printer Model' is (stl) file type, size is 192.17 KB.
A clip-on Santa Hat for the Flexi Raptor! The holiday season is here, time to make your Raptor blend in with the season and get into the holiday spirit!
This awesome festive accessory simply clips onto the head of your Flexi Raptor, and can be removed at any time. Tip: to clip it onto your Raptor, start by lining up the rear of the brim to catch the back of your Raptor's head, then simply rotate the hat onto the head while pressing it firmly in place.
This is a 3-piece print, with the brim and the ball being printed in white and the main body printed in red. The main body presses into the brim (press hard to get it fully seated), and the ball presses onto the tip of the main body. The ball will likely be slightly loose so some super glue is recommended for that connection to prevent losing it.
SUPPORT: All pieces print at 100% scale with no support, however, I would recommend using support for the brim and ball if you are printing at larger scales.
I have successfully tested this model at larger scales, all the way up to a 540% scale super-sized Flexi Raptor, however, it is a tighter fit at the larger scales.
If you print one, please post a make and leave me some feedback on how well it went - I'm always looking to improve the fit/design so that it works as best as possible across various printers and slicers.
Enjoy!
| FlexiRaptorSantaHatBall.stl |
| FlexiRaptorSantaHatBrim.stl |
| FlexiRaptorSantaHatMain.stl |
