If you like cryptids, check out my articulated mothman
https://www.thingiverse.com/thing:6794908
The model is designed to be stationary and does not articulate.
This model requires some glue for assembly. I used E600 glue but feel free to use your favorite. Assembly is fairly straight forward but one thing to note is that when gluing the arms into place, they will want to rotate out of position from gravity, unless you also glue the back plate into place.
So be sure to glue both the arms and back part at the same time to keep the arms from rotating and drying in an incorrect position.
This model is 100% my own creation and I give the following permissions:
You can:
Sell printed models (online or locally)
Create remix versions with attribution
Please don't:
Sell the model files
Claim the model as your own
Claim remixes as solely your own
| Flatwoods-ARMS.stl | 3.0MB | |
| Flatwoods-BACK.stl | 177.6KB | |
| Flatwoods-EYES.stl | 5.1MB | |
| Flatwoods-HEAD-EYES.stl | 4.0MB | |
| Flatwoods-HEAD-N0-EYES.stl | 3.4MB | |
| Flatwoods-PEG.stl | 24.5MB | |
| Flatwoods-SKIRT.stl | 7.4MB | |
| Flatwoods-TORSO.stl | 3.1MB |
