Flatline – Center Line Gage Flat 3D Printer Model
The file 'Flatline – Center Line Gage Flat 3D Printer Model' is (STL) file type, size is 517.5KB.
The file 'Flatline – Center Line Gage Flat 3D Printer Model' is (STL) file type, size is 517.5KB.
This accessory clips onto .375" diameter center line gages with a 60° conic point, so you can find the distance to the center of a hole from the edge. This accessory will add 1/8" thickness to one of the center line gages: the flat is tangent to the diameter of the gage. There is room for it to rotate a few degrees to a face that is not perfectly flat.
I was dissatisfied with the ability to find the perfect center of a hole relative to an edge or plane of an object I was modeling, so I added this to make it easier to get within .001"
Print at 100%, flat face down, manually add supports for clip arms only! I will be adding a chamfer at the corner to help pry the piece off the build plate.
| CenterLineFlat-3-8ths-blankface.STL | 397.7KB | |
| CenterLineFlat-3-8ths.STL | 1.3MB |
