Flask Of Bubbles 3D Printer Model
The file 'Flask Of Bubbles 3D Printer Model' is (stl,scad) file type, size is 2.5MB.
The file 'Flask Of Bubbles 3D Printer Model' is (stl,scad) file type, size is 2.5MB.
It's dangerous to bathe alone! Print this. Gives +3 to FUN and +5 to BUBBLES.
Here is partly customizeable....customizable..? can be customized? bubble making thing. It's made of a wand and a container to hold the bubbly liquid. You can add your own touch to it by adding your name or gluing any other print on top of the lid (the top face is 37,6mm in diameter, so scale your prints accordingly). It's recommended to edit the .scad with openSCAD as the font support in the Customizer is lacking.
Update: The design was simplified and the lid can now be printed in two different orientation depending if it's just the blank one or if it has something attached (in Meshmixer) on top. A 45 degree chamfer was also added to better seal the container and lid and a fillet was added to the bottom of the bottom for a smaller overhang.
Check out my other designs here: https://www.thingiverse.com/Superbeasti/designs
| Bottle_Flask_of_Bubbles.stl | 1.4MB | |
| Bottle_SpiralFlask_of_Bubbles.stl | 2.2MB | |
| FlaskofBubbles.scad | 602.0B | |
| FoB.stl | 1.0MB | |
| Gem_Flask_of_Bubbles.stl | 1.6KB | |
| Lid_Flask_of_Bubbles.stl | 2.4MB | |
| Wand_Flask_of_Bubbles.stl | 241.9KB |
