fits cr2 batteries, screws are 2-56, pins 1/16", but the holes are undersized so you can ream/tap them to whatever
bulb i used was 5w, needs a 20-30deg lens (not shown)
switch knobs are pressed on with a soldering iron, then removed for assembly and later glued in place
| LightSC_Assembly.STL | 1.9MB | |
| LightSC_Body.STL | 931.3KB | |
| LightSC_Lenscap.STL | 288.1KB | |
| LightSC_RailLip.STL | 68.8KB | |
| LightSC_RailRelease.STL | 100.9KB | |
| LightSC_SwitchKnob.STL | 8.9KB | |
| LightSC_SwitchLid.STL | 347.8KB | |
| LightSC_SwitchPlate.STL | 11.4KB | |
| LightSC_SwtchLatch.STL | 64.9KB |
