The file 'FlashForge Creator/Pro/X/Dreamer Extruder Plastic. Works With Flex Filament. Also Works With The Monoprice 3d Printer And MicroCenter’s PowerSpec. Now Compatible With CTC With New Version. 3D Printer Model' is (stl) file type, size is 4.4MB.
Update 1/28/16:
Modified base to allow easier access to drive gear set screw from behind the spring.
Addeded CTC version. CTC uses a larger diameter spring so the hole has be enlarged to fit this bigger spring.
Update 7/20/15, the other day I made a video on how to install this.
It is my first youtube video ever so go easy. :-)
https://www.youtube.com/watch?v=BXY1MxEjYt0
I've been working on this one for a while and finally finished a few details and tuning the spring tension. Features of this design are: 1. only 2 pieces to print per side. 2. Uses brass bushing from the original plastic. 3. Fully supports Flex filament like Ninja flex and Fila Flex with no jamming.
I know there have been a couple change in the filament drive gear recently. Let me know if any adjustments need to be made. This version is based off the original straight drive gear. I have seen some newer ones with a rim on both sides and due to the tight fit of the drive gear it might rub. Easy fix, I just don't have any of the other drive gears at the moment to test fit.
Leave a comment on how this works out for you. Thanks.
| CTC_LeftBase.stl | 1.7MB | |
| CTC_LeftLever.stl | 1.6MB | |
| CTC_RightBase.stl | 1.7MB | |
| CTC_RightLever.stl | 1.6MB | |
| FF_LeftBase.stl | 1.5MB | |
| FF_LeftLever.stl | 1.7MB | |
| FF_RightBase.stl | 1.5MB | |
| FF_RightLever.stl | 1.5MB |
