Flashforge Adventurer 3 Side Cover And Spool Filament Holder 3D Printer Model
The file 'Flashforge Adventurer 3 Side Cover And Spool Filament Holder 3D Printer Model' is (stl) file type, size is 235.8KB.
The file 'Flashforge Adventurer 3 Side Cover And Spool Filament Holder 3D Printer Model' is (stl) file type, size is 235.8KB.
Updated - Fixed the orientation of the STL files.
I've designed but also remixed this from the following
Filament spool holder
https://www.thingiverse.com/thing:3363933
4-Part door cover
https://www.thingiverse.com/thing:3329107
I used the 4-Part door just as a template to save measuring it all and I am using the spool holder as it's a great design. The side door cover is a single piece so requires a 300mm sized printer. The clip is held up simply by an elastic band. Something like one from the loom craze works great.
I've also slotted the door cover so this can be installed once the filament has been loaded.
Designed to keep to stop drafts and keep the heat in if needed, also looks great and when you use an external spool it just looks stock :-)
The filament I used to print was an Eryone white which matches very well.
Everything just clips together but you can use a dab of glue on the clip cover if needed.
| Clip.stl | 8.9KB | |
| Clip_Cover.stl | 41.7KB | |
| Side_Cover.stl | 196.7KB | |
| Spool_Holder.stl | 550.3KB |
