Update 02/25/24: Added added no logo 100mm version. You can scale to desired sizes.
This is the first in a series of twisted shapes but this one has a unique flame flavor, so stands alone in name. It can be printed in single wall vase mode, no top layer, or set up like single layer, but turn off single layer mode and use 2 vertical wall layers 3-5 bottom layers and no top layers which I did with the three color example. In the three color example I hit pause while on the inner layer which helps get the flow going again and avoids noticeable defects on the outer layer. Adding pebbles or sand will aid stability.
This design also makes a nice bowl by stopping the print at a lower layer, like 50% though 80%.
If you stop your print at about 30% of its full height, it makes a great screw on lid for the full print of the same scale. See the last two photos.
| flamo199mm.stl |
| flamovase100mm.stl |
| flamovase140mm.stl |
| flamovase208mm.stl |
| flamovase82mm.stl |
| FlamoVaseRev2.stl |
| flamovasetest-1pr.stl |
| flamovasetest-1rh.stl |
| flamvase-100mm-nl.stl |
| flamvase-100mm-nl.stp |
| Twist-Flame156.stl |
