Flair Vent Cover 4×10 3D Printer Model
The file 'Flair Vent Cover 4×10 3D Printer Model' is (stl,json,scad) file type, size is 471.1KB.
The file 'Flair Vent Cover 4×10 3D Printer Model' is (stl,json,scad) file type, size is 471.1KB.
This is a replacement vent cover for 4x10 Flair Smart Vents.
The vent cover that comes with the Smart Vent is good (and is made of steel), but allows air out in 4 directions. In some cases, this is not what you want, say if the vent is under a window, or against a wall.
There are 3 basic versions of replacement vent, 1 way, 2 way and 3 way (the one that comes with the Smart vent is 4 way).
I have found that the 1 way is the most useful.
The Vent covers are 5in X 12in in size, so this is too big to print in one piece (on my printer), so there are versions for printing it in two halves.
See Flair for details on this system.
Update 23rd September 2021:
Updated .scad files to fix the size of the lights section. This allows you to set the cover to different sizes (eg 6x10), and the light bar will be the right length.
| louvered_vent_1way.stl | 198.5KB | |
| louvered_vent_1way_L.stl | 125.3KB | |
| louvered_vent_1way_R.stl | 76.6KB | |
| louvered_vent_1way_Reversed.stl | 205.9KB | |
| louvered_vent_1way_Reversed_L.stl | 130.5KB | |
| louvered_vent_1way_Reversed_R.stl | 79.7KB | |
| louvered_vent_2split_L.stl | 439.8KB | |
| louvered_vent_2way.stl | 172.0KB | |
| louvered_vent_2way_L.stl | 110.7KB | |
| louvered_vent_2way_R.stl | 64.0KB | |
| louvered_vent_3way.stl | 194.7KB | |
| louvered_vent_3way_L.stl | 123.0KB | |
| louvered_vent_3way_R.stl | 73.8KB | |
| louvered_vent_3way_Reversed.stl | 211.2KB | |
| louvered_vent_3way_Reversed_L.stl | 126.0KB | |
| louvered_vent_3way_Reversed_R.stl | 77.4KB | |
| vent_V1.json | 469.0B | |
| vent_V1.scad | 15.2KB |
