Fishing Lure Collection #2 3D Printer Model
The file 'Fishing Lure Collection #2 3D Printer Model' is (stl,dwg) file type, size is 5.1MB.
The file 'Fishing Lure Collection #2 3D Printer Model' is (stl,dwg) file type, size is 5.1MB.
This is the second edition of my fishing lure designs. (The first one is https://www.thingiverse.com/thing:3827854)
I have tested these lures and they work pretty well...the top water is a little hard to tune, so be forewarned!
I printed these at .15mm layer height with 10% infill in white PLA.
I have included a dwg file for the through wires in case you have inventor and can make use of them. I print them out on paper 1:1, glue it to a piece of 1/4" aluminum and at each bend, drill a 1/8" diameter hole. Then I put a 1/8" peg in them (I cut the heads and tip off a roofing nail). Then I made a little tool to help bend the wire around the peg for a perfect fitting through wire.
Hope you have as much fun making, painting and catching as I have.
| BigCranky.stl | 2.1MB | |
| BigCrankyMirror.stl | 2.1MB | |
| StJimmy.stl | 1.0MB | |
| StJimmyMirror.stl | 1.0MB | |
| StrikeKing.stl | 1.6MB | |
| StrikeKingMirror.stl | 1.6MB | |
| WigglerTopWater.stl | 1.3MB | |
| WigglerTopWaterMirror.stl | 1.3MB | |
| wires.dwg | 288.7KB |
