The file 'First-Surface Drain 3D Printer Model' is (scad,stl,x3g) file type, size is 6.7MB.
This is a bulkhead fitting I designed to add drains to a series of buckets/troughs. It is designed to attach lengths of (garden) hose to the outlet barbs.
.
The drain can fit through a 3/4 to 1 inch hole through any flat container wall up to 1 inch thick. (Swimming pools, barrels, ponds, fish tanks, or whatever you've got.)
.
The drain is what I call "first surface" (more on that in the instructions tab) which basically means it looks interesting and is printable without additional supports.
.
This can also be found on my projects blog, here:
https://theheadlesssourceman.wordpress.com/2015/04/24/first-surface-drain/
| drain.scad | 5.3KB | |
| elbow_and_drain.stl | 3.6MB | |
| elbow_and_drain.x3g | 2.7MB | |
| inside_drain.stl | 8.1MB | |
| outside_elbow.stl | 5.0MB | |
| outside_elbow.x3g | 1.8MB | |
| outside_tee.stl | 5.1MB | |
| outside_tee.x3g | 2.1MB | |
| tee_and_drain.stl | 3.7MB | |
| tee_and_drain.x3g | 3.0MB |
