Firefly: The Game Card Deck Holders 3D Printer Model
The file 'Firefly: The Game Card Deck Holders 3D Printer Model' is (stl,f3d) file type, size is 370.7KB.
The file 'Firefly: The Game Card Deck Holders 3D Printer Model' is (stl,f3d) file type, size is 370.7KB.
I looked at a lot of card deck holders for Firefly. I really liked davidandmaraya's best (https://www.thingiverse.com/thing:1924234), but I wanted to make some improvements. So I created these models that print in 1/2 the time and are much more compact.
These models are optimized for printers with a 0.4 mm nozzle and 2 perimeter shells. Infill doesn't need to be more than 20% and supports are NOT required.
UPDATE 8/28/2017 The Supply deck would occasionally tip over backwards on me, so I increased the angle of back supports by 5 degrees.
UPDATE 8/29/2017 I added models for sleeved cards that will accommodate all the expansions.
UPDATE 5/20/2020 I added sleeved versions for those without the complete set.
NOTE: The contact and supply deck holders will accommodate 10mm of cards (starter game plus Breakin' Atmo). Some expansions add additional cards. The Burn deck will accommodate 14mm of cards which covers the Alliance Space, Border Space, and Aim to Misbehave decks (starter game plus Breakin' Atmo). You can use the Burn deck holders if you have more than 10mm thick deck of supply cards. Otherwise, please let me know how thick your deck is and I can create a custom holder for your cards. My models are parametric so it is super easy to create additional versions.
| Burn_Deck.stl | 41.9KB | |
| Burn_Deck_18mm.stl | 38.6KB | |
| Burn_Deck_22mm.stl | 20.6KB | |
| Burn_Deck_26mm.stl | 37.4KB | |
| Burn_Deck_28mm.stl | 36.4KB | |
| Burn_Deck_Sleeved_20mm.stl | 20.2KB | |
| Burn_Deck_Sleeved_Complete.stl | 35.0KB | |
| Contact_Deck.stl | 39.1KB | |
| Contact_Deck_14mm.stl | 39.8KB | |
| Contact_Deck_Sleeved_15mm.stl | 21.2KB | |
| Contact_Deck_Sleeved_Complete.stl | 34.9KB | |
| Firefly_Burn_Deck.f3d | 264.9KB | |
| Supply_Deck.stl | 44.0KB | |
| Supply_Deck_Sleeved_15mm.stl | 22.5KB | |
| Supply_Deck_Sleeved_Complete.stl | 38.2KB |
