Firecracker Cannon 3D Printer Model
The file 'Firecracker Cannon 3D Printer Model' is (stl) file type, size is 159.4KB.
The file 'Firecracker Cannon 3D Printer Model' is (stl) file type, size is 159.4KB.
! Use at your own risk !
! I accept no liability for personal injury or property damage !
This cannon is made for 6,5mm diameter firecrackers and can shoot airsoft BB´s.
There is a nice easy system to get the fuse inside the ignition hole. Only push the firecracker trough the big hole of the barrel and the fuse is mostly coming out of the small hole. ( there is a hopper system in the back of the barrel)
The walls are very thick, but safety distance and safety equipment should be worn to prevent injury. Have some fun with this Thing!
To see this Thing in action, just watch this: https://youtu.be/7SqrMBzAZ1A
Many thanks to hunterws for producing this video!
It would be nice if you post your print :D
And if you like to spend me a coffee, just tip me xD
! Use at your own risk !
! I accept no liability for personal injury or property damage !
| Kanonenseitenteile.stl | 508.9KB | |
| Kanonen_Lauf.stl | 1.2MB | |
| Stopfer_Kanone.stl | 253.6KB |
