My Take on Fireball XL5 this is a working project and amendments will follow

Proven file will be published as and when they become available
files offered are stl files and can be utilized in blender etc.
the ctb file is compatible with Mar resin printers and prints part 6,5,4,3,
i have noticed there is no drain hole on segment 4
which means when you knock it of the plate it will be full of uncured resin
Please knock it of into your resin tray and salvage it with tweezers
I will ament this later(soon)
section 4 now amended
Photo of first print seems pretty good a little sanding on the fatted base layers needed but minimal
Just added a ctb file for section 2 split it into 2 so it can print faster

Remember all these files must be printed at the same scale that your printer can handle
if you have a larger bed you can split further and get a quicker print,

Estimated cost of resin for a 70% print is around £2 and in the region of 6 hours printing

Both ctb files have printed fine
hopefully upload the third 1 later
Engine section ctb file now added

final model length is 29cm At 70% scale

Some alignment issues shall have to puta few locators on the pieces nothing that cant be solved with a little resin and sanding

use wet and dry 400-600 grit