Fire Lookout Station 3D Printer Model
The file 'Fire Lookout Station 3D Printer Model' is (stl) file type, size is 9.5MB.
The file 'Fire Lookout Station 3D Printer Model' is (stl) file type, size is 9.5MB.
This is a remix of this Fire lookout tower from
https://www.thingiverse.com/thing:4098055
Based on the Konocti Lookout tower.
For my Nscale Skilift Static model, look here... https://www.thingiverse.com/thing:4777593
N O T E
This is not an easy model to print due to the frailty of the model.
Upper intermediate or advanced use of a resin printer is highly recommended before attempting.
Added stairs and resized to N-Scale.
Tower 1 piece print.
Tower Only
Top Only
Top and Tower
Stairs 1-7
Bottom stair is Stair 1, 2,3,4,5,6, Top is Stair 7.
I broke apart the pieces to allow better printing as I realize the stairs are very small. I recommend slow speed, good exposure and reducing the lift height as much as possible.
If printed in pieces, glue the appropriate stairs and top together.
Stairs, no stairs, stairs on the outside, stairs on the inside.. It's all up to you. G'Day.
.stl format
Print with a good amount of supports on resin printer.
| Stair-1.stl | 13.5MB | |
| Stair-2.stl | 7.1MB | |
| Stair-3.stl | 7.5MB | |
| Stair-4.stl | 7.2MB | |
| Stair-5.stl | 7.3MB | |
| Stair-6.stl | 7.6MB | |
| Stair-7.stl | 5.7MB | |
| Top.stl | 417.1KB | |
| Tower-Only-wcenter.stl | 334.5KB | |
| Tower-Only.stl | 1.8MB | |
| Tower-withTop.stl | 4.0MB | |
| TowerwithStairs.stl | 9.8MB |
