Fire Deer Lithophane 3D Printer Model
The file 'Fire Deer Lithophane 3D Printer Model' is (zip,stl) file type, size is 116.0MB.
The file 'Fire Deer Lithophane 3D Printer Model' is (zip,stl) file type, size is 116.0MB.
Software used:
Photoshop, Blender, Meshmixer, S3D.
Dimensions: 165mm x 115mm x 6mm.
Note: This is a large and detailed stl file and may put some systems/slicers under pressure. It slices best in Cura 3.6+ or S3D.
A note on slicing in Simplify3D:
It’s easiest to slice the lithophane in Cura(or Slic3rPE) as there’s an extra step in Simplify3D due to the way the lithophanes are created(this by design to allow additional editing/printing options for more advanced users).
If you want to use Simplify3D you just need to do the following:
The added bonus of doing this is you can re-crop the image into the frame if you wish, or easily resize or remove the frame altogether.
If you don’t do the above in S3D there may be a tiny gap between the frame and the lithophane when you actually slice the model.
The "x2-Litho_Boots-6mmSlot-Gadunky.com.stl" is really only added to allow me to upload the zip file with the lithophane in it(Thingiverse needs at least one stl file to allow the zip).
| Fire_Deer-WithFrame-HDLithophane-Gadunky.com.zip | 139.7MB | |
| x2-Litho_Boots-6mmSlot-Gadunky.com.stl | 1.6MB |
