Fingerboard Display Rack 3D Printer Model
The file 'Fingerboard Display Rack 3D Printer Model' is (gcode,stl) file type, size is 815.2KB.
The file 'Fingerboard Display Rack 3D Printer Model' is (gcode,stl) file type, size is 815.2KB.
Remixed design
You will need to print
ALL Parts
OR
One x Part 1
One x Part 2
Three x Part 3
One x Part 4
Changed dimensions to fit a standard Tech Deck. I separated the parts into individual prints to get better results from my printer. I included a file with all the parts in one print.
Increased the thickness, scaled it up, cut the feet to prevent warping, added an additional piece to hot glue onto the bottom to add strength.
I did a grid infill and set the top walls to 2 layers thick because I thought the pattern looked pretty cool showing through a little bit, but you can do what you want.
Added hot glue to each connection to increase strength.
| ALL_Parts.gcode | 1.2MB | |
| ALL_Parts.stl | 133.7KB | |
| Fingerboard_Display_Part_1.gcode | 738.0KB | |
| Fingerboard_Display_Part_2.gcode | 746.6KB | |
| Fingerboard_Display_Part_3.gcode | 65.5KB | |
| Fingerboard_Display_Part_4.gcode | 47.4KB | |
| Finger_Board_Display_Part_1.stl | 55.1KB | |
| Finger_Board_Display_Part_2.stl | 55.1KB | |
| Finger_Board_Display_Part_3.stl | 5.9KB | |
| Finger_Board_Display_Part_4.stl | 6.1KB |
