To close the case you need to print:
Use a piece of filament for the hinge pins, or use nails or metal rod. Designed as a 2mm hole, so anything about 1.8 after accounting for printer tolerances.
To fix the handle I used 2 M5x10mm ISO 7380-1 screws and 2 M5 nuts.
To keep the drone and RC still, I put some foam inside the box, as you can see from the images.
The Fimi_X8SE - Bottom -_ v1.stl has the possibility to add an additional box below, I have designed two versions, one that houses 2 batteries (the batteries must be inserted on the side with the electrical contacts facing inwards) and a version empty so you can enter what you want.
Happy printing!
====================================================================
If you have a FIMI X8 SE / FIMI X8 SE 2020 you may also be interested in:
Box for the only drone: https://www.thingiverse.com/thing:4379406
Box for drone and RC: https://www.thingiverse.com/thing:4580561
Box for spare propellers: https://www.thingiverse.com/thing:4575055
Box for filters:
Filter holder: https://www.thingiverse.com/thing:4574370
====================================================================
| Fimi_X8_SE_-_Block_Arm.stl | 761.8KB | |
| Fimi_X8_SE_-_Bottom_-_v1.stl | 1.1MB | |
| Fimi_X8_SE_-_Bottom_-_v2.stl | 728.6KB | |
| Fimi_X8_SE_-_Handle.stl | 708.5KB | |
| Fimi_X8_SE_-_Main_Block.stl | 774.0KB | |
| Fimi_X8_SE_-_Top.stl | 1.4MB | |
| Fimi_X8_SE_-_Under_Bottom_-_Battery.stl | 2.7MB | |
| Fimi_X8_SE_-_Under_Bottom_-_Empty.stl | 1.5MB |
