Filter basket for garden pond pump.
Two-stage coarse filter.
Version 1 is a small print in one filter.
Version 2 is bigger and demountable for better cleaning.
Both versions available in M22x1.5 or G1/2"
And both versions without any thread or connection - to implement in your design.
Version 1:
Holes in the inner basket 2mm diameter.
Holes in the outer basket 5mm diameter.
Thread length: 13mm
Basket length without thread: 52mm.
Basket diameter: 51mm.
Version 2:
Holes in the inner basket 2mm or 7mm diameter.
Holes in the outer basket 5mm diameter.
Thread length: 15mm
Basket length without thread: 95mm.
Basket diameter: 51mm.
Update 08/21: I made an inner basket with holes 7mm diameter because I want more and bigger particles in the filter container behind the pump and not at the filter basket before the pump. And the pump is able to deal with 5mm particles.
Update 11/21: The 1/2" version of the inner basket broke 2 times at the same position. Between thread and hex-plate. I found a weak point and made it much stiffer. It didn't broke again.
Also on the picture:
Hose connector 1/2" find here:
https://www.thingiverse.com/thing:4848926
Find analysis of 6 month use under water here:
http://croonen.tech/pla-in-the-extremes-of-everyday-life/
| V1-Filterkorb_G1-2.stl | 8.3MB | |
| V1-Filterkorb_M22x1-5.stl | 8.5MB | |
| V2-Aussenkorb.stl | 1.4MB | |
| V2-Deckel.stl | 30.9KB | |
| V2-Innenkorb_G1-2_D2mm.stl | 8.8MB | |
| V2-Innenkorb_G1-2_D7mm.stl | 6.0MB | |
| V2-Innenkorb_M22_D2mm.stl | 5.3MB | |
| V2-Innenkorb_M22_D7mm.stl | 2.0MB | |
| V2-Innenkorb_ohne_Gewinde_D2mm.stl | 3.2MB | |
| V2-Innenkorb_ohne_Gewinde_D7mm.stl | 501.7KB | |
| V2-Schraube.stl | 234.0KB |
