mINI mod for the whole thing so it could fit Ender 5 plus.
Also made a new Creality Bolt holder to fit the horizontal bracket
**EDIT I ADDED A ROLLER WITH A LIP PER A REQUEST FROM A USER
I Include a stl to do a single Print everything is in an order so the support brim is all connected for more support for the roller.
Update02
I Went Ahead and addthe wall mount and the stand to the mINImod
****The first upload was bugged for some reason it's now fixed
If you wanna use real bearings instead of plastic use
608zz skate bearings
https://realfifty.page.link/Bearings
For The Roller
Support with cross and 30%fill
Brim with 20 lines
bed temp 70
20% fill on the roller
1.2mm walls
.15 layer
speed 50mm/s
I also put a tweak at Z and slow the speed to 50% at layer 560 not necessary but my nipple kept coming out weird
everything else is the same except the infill
should be set to 40-70%
I use 50%
| FILLERmINImodROLLER_.stl | 463.0KB | |
| FILLERmINImod_Bearing.stl | 332.2KB | |
| FILLERmINImod_ENDER5+FIX.stl | 651.4KB | |
| FILLERmINImod_ENDER5+Nut_only.stl | 365.2KB | |
| FILLERmINImod_Holder.stl | 581.1KB | |
| FILLERmINImod_SinglePrint.stl | 1.9MB | |
| FillerStandV2.stl | 1.1MB | |
| FillerWallMount.stl | 722.3KB |
