Filament spool holder
Consists of 2 end-pieces and as many ribs that you want in-between.
PVC plastic pipe - You need two sizes of pipes if you want to make the stand extendable. I went with 20mm and 16mm (the actual size of the 16mm turned out to be 15,86mm but I fixed it with 2 laps of tape where its hidden inside the 20mm to keep it centered).
If you're not interested in a extendable stand, then the bigger of the two (20mm) will suffice, however, the smaller one adds a lot of stability to the construction.
I use Gorilla glue, it swelled in between the pipes and created a super strong bond.
– Update –
Added .stl's for other hole sizes:
B_End_piece_127mm.stl | 2.7MB | |
B_Rib_127mm.stl | 2.4MB | |
B_Rib_seam_cut_127mm.stl | 1.4MB | |
C_End_piece_95mm.stl | 2.7MB | |
C_Rib_95mm.stl | 2.4MB | |
C_Rib_seam_cut_95mm.stl | 1.4MB | |
Decoration.stl | 295.4KB | |
End_piece.stl | 2.7MB | |
Rib.stl | 2.4MB | |
Rib_seam_cut.stl | 1.4MB |