Hi all, this is a 3-position free standing filament spool holder I designed in Fusion 360 for my Anycubic Chiron.
This spool holder enables you to place the filament roll on either of the 3 spots while the printer is printing. As the z axis increases on your printer, you can easily lift the spool up to the next position.
When I put it all together, the feet on the sides needed a very slight file/sand to get the edges square to fit in the base holes. Your printer may or may not produce a more exact part, so I have not opened up the clearance gaps in case. If you have your printer dialed in, you may not need any sanding. Same goes for the roller holder, that also needed a slight file to get rid of some printer lines and then it popped in nicely to the side pockets.
This stand is very stable at any spool height.
I used a Mandalorian symbol on the base from ty10y. Thanks ty10y
https://www.thingiverse.com/thing:2091411
The roller holder was designed from a picture from hugohuge
https://www.thingiverse.com/thing:3020026
There are hundreds of remixes of the roller design out there now, I'm not sure where the original came from but let me know if I need to add their link if required.

I've included a base without the Mandalorian symbol if you want to add your own symbol or leave it blank.
I printed all parts except the sides on my Ender 3 Pro, the sides I printed on my Anycubic Chiron which has a 400x400x450 printing capacity.

You will also need two 608zz bearings