Filament Spool Holder that uses 608ZZ bearings.
This was inspired by the excellent work done by HugoHuge https://www.thingiverse.com/thing:3020026. However it uses a different approach to a modular Filament Spool Holder.
First you choose the mount that mates with your printer (these are called Bolts). The following is a list of "Bolts" currently available:
Next print your Nut or Knob to go with your Bolt (hint: they all match).
Choose the style of Spindle (and the corresponding frame) that you want: Straight -- provides a very simple and very short frame; Ridge -- spindle that has containing ridges on either end.
Choose which length for the Frames/Spindle that you want to use. I have found that all of my spools do very well with the 75mm frame/spindle.
Assembly
All of the Frames use the same "plug" that inserts into an appropriate bolt. Take care to assure orientation of the bolt and frame are correct. You will notice on some of the bolts the end with the thread has an imprinted letter. Assure that the letter is upright and then glue the frame into place.
Insert one 608ZZ bearing into each end of the Spindle. It will be a firm fit, but make sure that they are well nested. There will be a couple of millimeters of the bearing sticking out of the spindle. Now insert each axel into a bearing on either end of the spindle. Take the entire spindle assembly and slide it into the slots on the ends of the frame.
Insert the Bolt into your printer's mount and secure with Nut/Knob.
Another version of my Filament Spool Holder is available at https://www.thingiverse.com/thing:4942495
Please do me a favor... I don't have access to the Creality family of printers. If you could print out the corresponding "Bolt" for your Creality printer and let me know about the fitment, I will be thankful. Also if you have other printers that you would like to see added to the list "Bolts" please let me know some dimensions and the like and I will do my best to provide support for those as well.
History
2021-09-17: Add new Bolt for the Tron XY2 and XY3
2021-09-12: Merge designs from thing:4942495. Also rework those designs so they are much stiffer (no sagging).
2021-09-02: Updated spindles to have two slopes to the bevels to keep the spool centered.
2021-09-01: Initial upload
| FH2-110_Frame_v3.stl | 825.4KB | |
| FH2-110_Spindle_v2.stl | 980.0KB | |
| FH2-80_Frame_v1.stl | 841.3KB | |
| FH2-80_Spindle_v2.stl | 1015.8KB | |
| FH2_Axel_v2.stl | 532.0KB | |
| FH3-110_Frame.stl | 360.5KB | |
| FH3-110_Spindle_v2.stl | 1.3MB | |
| FH3-75_Frame.stl | 380.2KB | |
| FH3-75_Spindle_v2.stl | 1.3MB | |
| FH3_Axel.stl | 766.9KB | |
| FH_Bolt-2020.stl | 76.8KB | |
| FH_Bolt-Creality_v4.stl | 6.6MB | |
| FH_Bolt-Neptune2.stl | 7.0MB | |
| FH_Bolt-TronXY_v3.stl | 31.4KB | |
| FH_Knob_v3.stl | 3.0MB | |
| FH_Nut.stl | 2.7MB |
