I am posting my version of a filament dry box. It can be printed for 2 or more spools. I have used a few parts from different designers, I will list them below for credit. If making the spool holder for 4 or more spools use a single metal rod to go through all parts.
Each 2 spool section will require a box with a length and width of 16cm x 20cm minimum. I used a 24L Sterilite box from walmart/homedepot but should work with most brands types. The new BOWDEN_EXIT file has just enough room to fit a 1.75mm bowden tube inside.
For every 2 spool section you will need:
Optional prints
Other FYI
dry box roller unchanged from
https://www.thingiverse.com/thing:3320749
Bowden tube exit modified from
https://www.thingiverse.com/thing:961881/files
Roller Rings modified from
https://www.thingiverse.com/thing:3598258
This is the first time I am posting files I remixed/borrowed, I apologize if I did it wrong.
| bowden_exit.stl | 140.0KB | |
| Drybox_base.stl | 127.9KB | |
| Drybox_Rollers.stl | 60.4KB | |
| DRY_BOX_-_Silica_basket.stl | 343.0KB | |
| ROD_endcap.stl | 46.0KB | |
| Roller_Rings.stl | 82.2KB |
