Hi everyone,
Here is a spool holder that does not require any gluing.
No supports required for the treads.
Brim is suggested but no required.
Spool v1
Gap= 0.30in or 7.62mm
Spool v2
Gap= 0.50in or 12.7mm
spool_side_1_v1.STL | 465.0KB | |
spool_side_1_v2.STL | 556.5KB | |
spool_side_2_v1.STL | 464.8KB | |
spool_side_2_v2.STL | 554.0KB |