With this device you can respool any filament on the standard spools with a inner diameter of 52mm. The Device is designed with a slight conical shape so it should hold enough to make the winding tight. The other side have a diameter of 10mm which should fit any common chuck of a akku-drill. I printed the big side with 2 perimeters and 5% infill while the 10mm diameter has 5 perimeters and 30% infill. Like this, its strong enough. Print with the big side on the bed. The 45° chamfer should allow it to print without to big overhangs.
In the Video you see how it works:
https://youtu.be/M8uaqxgrelo
FilamentRoller.stl | 650.3KB |