This is a simple filament guide I designed to go with my remixed 2020 Spool Roller mounted to the top of the my CR-10. Probably would work with similar printers like Tevo.
This mount this to the 2020 extrusion you will need:
2 M5 x 10 pan head cap screws
2 M5 T-Nuts
Spool Roller this was designed to work with:
https://www.thingiverse.com/thing:2587566
While I did take inspiration from some other filament guide designs this is my own design.
| Filament_Guide_PIP_v2.STL | 654.9KB |
