I upgraded my Z- and the cover was blocking the way of the filament guide i had made, that being said i made a new i found and turned out i didn't like it due it making noise and being hard on the extruder.
I like the roller idea so a came up with this one and so far it works great and no noise.
the roller and pin i find to work better for me.
Enjoy the mod i came up with and print away.
I did print the bracket at 45 % infill because there's a bolt going through it and i did have one break from over tension on the 1st one
Everything else i printed at 20% infill
This a mix of 2 different STL's
| Axis.stl | 12.4KB | |
| Roller.stl | 377.1KB | |
| Spool_feed_bracket_2.stl | 82.2KB | |
| wheel_arm_Mod_ver_1.stl | 70.4KB |
